Projection with a light blaster, using a metal gobo.
Model: Vyy Taute (Model Mayhem 2957456),
http:--www.modelmayhem.com-Vytaute
20170810 04...
Read more
Projection with a light blaster, using a metal gobo.
Model: Vyy Taute (Model Mayhem 2957456),
http:--www.modelmayhem.com-Vytaute
20170810 041
Read less
Model: Vyy Taute (Model Mayhem 2957456),
http:--www.modelmayhem.com-Vytaute
20170810 041
Read less
Views
1438
Likes
Awards
Winner in Hats Photo Challenge
Peer Award
Outstanding Creativity
Top Choice
Superb Composition
Magnificent Capture
Superior Skill
Absolute Masterpiece
Top Ranks
Categories
Same photographer See allBehind The Lens
Discover more photos See all
Behind The Lens
Location
This shot was taken in my studio in Rijswijk, near The Hague, The Netherlands. The studio is basically an office floor without too much charm, but I love it.Time
I met with the model (Vyy Taute) and a friend of hers in the in the evening, after work. As it's in the studio and not based on ambient light, the time of day is not so relevant for this shoot.Lighting
I used a light-blaster for this shoot. A light-blaster is basically a connector between a canon lens, a compact flash and (here) a metal gobo. The flash has an inbuilt receiver and was placed to the side of the camera, at camera height. By positioning the light-blaster away from the camera, the lines of light and shadow emphasise a 3D-structure, such as the model's beautiful body.Equipment
I used a light blaster with a metal stripe gobo, a Yongnuo compact flash 560 III with inbuilt receiver and a canon lens. Apart from the light-blaster, I used a Nikon D800 with a Nikon 85mm lens and a Yongnuo trigger. Something embarassing happened during the shoot; I tested a friend's more powerful flash in the lightblaster. I noticed too late that the flash was getting too hot and that the plastic fresnel lens on the head started to melt... He's now the proud owner of an additional, brand new flash head...Inspiration
I'm fascinated by the effects of light and shadow; by positioning the light-source away from the camera in combination with a metal gobo, the resulting stripes underline the shape of her body.Editing
Some minor post was applied in Adobe Camera Raw (exposure, contrast, clarity, skin, cropping).In my camera bag
My equipment differs depending on the shoot. In the studio I normally use a Nikon D800 with a Nikon 85 mm 1.8, Tamron 24-70 mm 2.8 and a Tamron 70-200 mm. As lights I typically use studio flashes such as Godox QT600 and Jinbei HD600v. However, as many of my shoots are on the beach or underwater, the content of my bag varies a lot.Feedback
It helps to clearly describe the project to your model, as it is not an everyday shoot for them. The light-blaster needs to be manually focused on your model, which is not an easy task without a permanent light source (it's a compact flash after all). It's a bit of an awkward moment when you seem to be staring at her for the focusing, so better explain ahead what you are doing. Every-time the model's position or the light-blaster's position is changed, the light-blaster needs to be refocused. The Light Blaster is a cool device. You can insert either your own framed slides or those sold online for it. I ordered a specially made metal gobo for maximum contrast. The light Blaster works with canon lenses (or Nikon with an adaptor), but does not lock the lens. As you have to manually focus the lens, it may happen that the lens falls off, so be careful. The flash will typically fire at maximum power and may get hot, make sure you bring enough batteries.